Corston General Electrical Fitting Instructions
Corston Digital Dimmer Fitting Instructions
Corston Two - Way Dimmer Fitting Instructions
Added To Basket
Added To Basket
£62.00
2G Dimmer Bronze
Code: 6138
Product Description -
All hardware is machined from solid brass which gives a superb level of detail and weight. The plate is also pressed from 1.5mm solid brass sheet. Finished in dark bronze, the parts will gain patina and improve in character over their long life
There are two types of Corston dimmers. Both give market leading silent performance and can be used on LED’s and incandescent bulbs. Both dimming modules allow the minimum brightness of the bulbs to be programmed to avoid LED flickering at low brightness. They can also be programmed for trailing or leading edge modes to keep the bulbs in optimum condition.
Dimmer - Digital. The switch is tremendously tactile with short travel on/off, and turns with satisfying notches. It needs to be combined with retractive toggle switches to control the same bulb from multiple locations. The connected toggle switches can also dim and turn the light on/off.
3-250W LED 10-350W incandescent bulbs
Dimmer – Two Way. This switch has a longer button travel. It needs to be combined with two-way or intermediate toggle switches to control the same light from multiple locations. The connected toggle switches can turn the light on/off
5-150W LED 10-400W incandescent bulbs
- All hardware is made from solid brass for a very tactile feel
- All dimmers have built in thermal and short circuit protection
- Minimum brightness can be set, which avoids any bulb flicker
- Trailing or leading edge dimming control. Trailing edge is the default setting and is recommended to prolong LED life
- Soft start operation which protects the bulbs
- Two dimmers cannot be combined to control the same light. Use toggle switches in combination with a dimmer switch
- We recommend a 35-45mm deep back box
- IEC EN60669 Compliant
- 230-250V~50Hz
- For complete fitting details please read the instructions PDF below
- Dimensions; h86mm x w86mm x d45mm. Dimmer height is 20mm
Delivery Information +
Orders placed before 1:00pm will be dispatched on the same day, using a DPD next day service. From time of order, delivery will usually take 1-2 working days.
Orders placed over the weekend or bank holiday will be dispatched on the next working day.
For delivery to Europe, it can take between 3-5 working days from dispatch. For delivery to other international countries, it can take between 5-10 working days from dispatch.
• UK Delivery cost is £6 for orders £1-£99
• UK Delivery cost is £10 for orders £100-499
• UK Delivery cost is £20 for orders £500+
• European Delivery cost is £30 for orders £1-199
• European Delivery cost is £60 for orders £200+
• Worldwide Delivery cost is £30 for orders £1-199
• Worldwide Delivery cost is £80 for orders £200-999
• Worldwide orders over £1000 will be quoted at cost
Instructions +
6138
1945
Digital Dimmer
Forget old buzzing magnet dimmers. Corston modules control LED's digitally auto-sensing trailing or leading edge modes. The on/off button is short with precise intervals as you turn up & down.
Ultra Low Profile
The front plate is ultra-thin, 1.5mm solid brass. So the switch is very tight to the wall for a subtle and sophisticated finish.
Solid Brass
The dimmer knob is machined from solid brass, just like all of our hardware. This means it has very sharp details, and feels solid to use.
Product PDF
2G Dimmer Bronze
Code: 6138
£62.00
View on website
All hardware is machined from solid brass which gives a superb level of detail and weight. The plate is also pressed from 1.5mm solid brass sheet. Finished in dark bronze, the parts will gain patina and improve in character over their long life
There are two types of Corston dimmers. Both give market leading silent performance and can be used on LED’s and incandescent bulbs. Both dimming modules allow the minimum brightness of the bulbs to be programmed to avoid LED flickering at low brightness. They can also be programmed for trailing or leading edge modes to keep the bulbs in optimum condition.
Dimmer - Digital. The switch is tremendously tactile with short travel on/off, and turns with satisfying notches. It needs to be combined with retractive toggle switches to control the same bulb from multiple locations. The connected toggle switches can also dim and turn the light on/off.
3-250W LED 10-350W incandescent bulbs
Dimmer – Two Way. This switch has a longer button travel. It needs to be combined with two-way or intermediate toggle switches to control the same light from multiple locations. The connected toggle switches can turn the light on/off
5-150W LED 10-400W incandescent bulbs
- All hardware is made from solid brass for a very tactile feel
- All dimmers have built in thermal and short circuit protection
- Minimum brightness can be set, which avoids any bulb flicker
- Trailing or leading edge dimming control. Trailing edge is the default setting and is recommended to prolong LED life
- Soft start operation which protects the bulbs
- Two dimmers cannot be combined to control the same light. Use toggle switches in combination with a dimmer switch
- We recommend a 35-45mm deep back box
- IEC EN60669 Compliant
- 230-250V~50Hz
- For complete fitting details please read the instructions PDF below
- Dimensions; h86mm x w86mm x d45mm. Dimmer height is 20mm