How to install our sprung door handles
You’ll need our 45mm Forstner drill bit and retrofit kit to create an accurate new hole for your handles. You’ll also need to watch the fitting instructions before installing.
Watch nowHow to install our door handles with backplates
You’ll need our 12mm template profiler router bit and flat plate routing jig to successfully install our handles that come with short and long backplates. You’ll also need to watch the fitting instructions.
Watch nowHow to install our hooks
Concealed fixing hooks like ours are fitted onto a wall bracket. Our step-by-step instructions will make installation easy.
Watch nowHow to restore the finish on your Antique Brass products
Use our Antique Brass restoration kit to return the finish to its original look. Let us show you how in a few simple steps.
Watch nowDownloadable instructions
Plasterboard back box and switch installation
Our switch and socket back boxes are something special. They're made to work perfectly with our front plates for a flush finish. Here's how to install our plasterboard back box with one of our switches.
Watch nowHow to install our Clear switch and socket plates
You can use our Clear polycarbonate plates with paint or wallpaper. Here’s how to achieve a seamless look.
Watch nowHow to restore the finish on your Antique Brass products
Use our Antique Brass restoration kit to returnthe finish to its original look. Let us show you how in a few simple steps.
Watch now