1G Centre Retractive Rocker Switch

Antique Brass White 10027

(No reviews yet)

£42.00

In Stock

This one-gang centre-retractive rocker switch in our Antique Brass finish sits flush to the wall. The front plate is also just 1.5mm thick.

The plate and rocker are both made from solid brass to create perfectly crisp edges.

The small amount of plastic around the rocker comes in white (like this one) or black.

A centre-retractive switch flicks back to the centre ‘off’ position when you let go. You can use it for things like electronic blinds and, together with an in-line dimmer module, to dim lights.

Antique Brass is what’s called a ‘living’ finish because it reacts to the air and moisture around it and gets darker over the first three months, especially in the areas you touch it most.

We’ve also given it a head start by ageing it by hand before sending it out, so it has that antique look right out the box.

  • Use with our metal or recycled plastic back boxes
  • Match with lighting and hardware in our Antique Brass finish

Technical Specifications +-

  • Dimensions: H86mm x W86mm x D32mm.
  • Switches Rated to 16A
  • 230-250V ~ 50Hz
  • Complies with BSEN60669-1
  • The switch Plate sits 1.5mm from the wall
  • Metal die-cast Chassis
  • Deep backbox must be used
  • In line dimmer must be located remotely

Installation +-

We recommend using a 47mm back box with this switch.

All the details on how to install our switches and sockets are on our instructions page.

Delivery Information +-

Delivery in days not weeks. We dispatch all orders quickly (within 24 hours) and use a next day delivery service.

UK Delivery costs
• Orders up to £49.99: £7
• Orders from £50 - £249.99: £12
• Orders from £250 - £1,499.99: £15
Orders over £1,500 will be calculated at checkout. For International delivery costs please visit our delivery page here.
£42.00

Technical Specifications +-

Installation +-

Delivery Information +-

  • Dimensions: H86mm x W86mm x D32mm.
  • Switches Rated to 16A
  • 230-250V ~ 50Hz
  • Complies with BSEN60669-1
  • The switch Plate sits 1.5mm from the wall
  • Metal die-cast Chassis
  • Deep backbox must be used
  • In line dimmer must be located remotely

We recommend using a 47mm back box with this switch.

All the details on how to install our switches and sockets are on our instructions page.

Delivery in days not weeks. We dispatch all orders quickly (within 24 hours) and use a next day delivery service.

UK Delivery costs
• Orders up to £49.99: £7
• Orders from £50 - £249.99: £12
• Orders from £250 - £1,499.99: £15
Orders over £1,500 will be calculated at checkout. For International delivery costs please visit our delivery page here.