- Dimensions: H86mm x W86mm x D32mm.
- Switches Rated to 16A
- 230-250V ~ 50Hz
- Complies with BSEN60669-1
- The switch Plate sits 1.5mm from the wall
- Metal die-cast Chassis
- Deep backbox must be used
- In line dimmer must be located remotely
1G Retractive Rocker Switch
Clear Antique Brass Black 10458
(No reviews yet)
£38.40
In Stock
This one-gang retractive rocker switch in Antique Brass is a more modern alternative to our toggle switches.
The clear plate is made from slim Perspex. It comes with a paper template that you can either paint over or use to cut out wallpaper, which blends the switch into the wall.
The rocker switch itself is made from solid brass to create perfectly crisp edges.
The small amount of plastic around the rocker comes in black (like this one) or white.
A retractive switch flicks back into the top ‘off’ position when you let go. You can use it for things like doorbells or in-sink food waste grinders. Or, use it with an in-line dimmer module to dim lights. Press and hold to dim up. Then press and hold again to dim down.
Antique Brass is what’s called a ‘living’ finish because it reacts to the air and moisture around it and gets darker over the first three months, especially in the areas you touch it most.
We’ve also given it a head start by ageing it by hand before sending it out, so it has that antique look right out the box.
- Use with our metal or recycled plastic back boxes
- Match with lighting and hardware in our Antique Brass finish
Technical Specifications +-
Installation +-
We recommend using a 47mm back box with this switch.
All the details on how to install our switches and sockets are on our instructions page.
Delivery Information +-
UK Delivery costs
• Orders up to £49.99: £7
• Orders from £50 - £249.99: £12
• Orders from £250 - £1,499.99: £15
Orders over £1,500 will be calculated at checkout. For International delivery costs please visit our delivery page here.
Technical Specifications +-
Installation +-
Delivery Information +-
- Dimensions: H86mm x W86mm x D32mm.
- Switches Rated to 16A
- 230-250V ~ 50Hz
- Complies with BSEN60669-1
- The switch Plate sits 1.5mm from the wall
- Metal die-cast Chassis
- Deep backbox must be used
- In line dimmer must be located remotely
We recommend using a 47mm back box with this switch.
All the details on how to install our switches and sockets are on our instructions page.
UK Delivery costs
• Orders up to £49.99: £7
• Orders from £50 - £249.99: £12
• Orders from £250 - £1,499.99: £15
Orders over £1,500 will be calculated at checkout. For International delivery costs please visit our delivery page here.