Single Socket UK & 1G 50mm Module & 2G Switch Plate
This paintable single module, single socket and two-gang plate works with any of our 50mm modules, any of our toggle switches or our rotary dimmer switch and comes with one 13A UK socket in low-sheen white plastic or black with a slightly textured finish.
- Made from solid brass
- Etch primer allows paint to adhere well for a seamless custom finish
- Ultra-slim 1.5mm, flush-fit plate
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
In stock
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
FAQs
Electrical items must be installed by a qualified electrician.
You can view and print instructions on our mobile-friendly instructions page.
Our clear switches and sockets come with backing paper that you can either paint, or use as a wallpaper template. When you're happy with your chosen look, secure the clear front plate over the backing paper to conceal the wires.
All our electrical products should be installed by a qualified electrician.
Yes – we sell individual components which you can find under the switches and sockets tab at the top of the page.
For help with creating your own combinations, please email our customer service team at hi@corston.com.
A retractive switch flicks back into the top 'off' position when you let go. A center retractive switch flicks back to the center 'off' position when you let go. It can be pressed up or down to make two separate connections.
When used with one of our in-line dimmer modules, a short press will turn the light on and off. A press and hold will dim and brighten the light.
Both versions must be used with one in-line dimmer module per circuit.
Intermediate switches need to be used when three or more switches are required to control the same light. Two-way switches are used at the start and end of the circuit, and one or more intermediate switches are added to the middle of the circuit.
Multiple two-way dimmer modules can't be used to control the same light. A two-way dimmer can be combined with two-way or intermediate switches to control the light from multiple locations.
Retractive and centre retractive toggles/rockers can be used for a multiple point dimming circuit when used with an in-line dimmer module (one per circuit).
All our dimmers have been engineered with anti-flicker technology. If you're experiencing flickering, please follow our mode setting instructions.
We ship the components and front plates separately to protect the plates before installation. This approach allows electricians to install the switches and sockets without having to disassemble each one too.
All our switches and sockets must be fitted with back boxes that are at least 35mm in depth. Our rocker switches and our 6G and 8G light switches must be fitted with our bespoke 47mm back boxes to ensure the flush fit of our plates.
