Two Way Dimmer Switch 400W Antique Brass
In stock
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
Using our components, you can create any combination of switches or sockets that you need.
This antique brass rotary dimmer switch works with our antique brass and paintable switch plates. It has a collar underneath the rotating knob that hides all the working parts.
We’ve made both the knob and collar from solid brass (rather than plastic wrapped in metal) to create perfectly crisp edges.
The 400W version of our two-way dimmer is ideal for projects with higher wattage requirements.
You can have one of these two-way dimmers on a circuit alongside a two-way toggle or rocker and any number of intermediate toggles/rockers. To have multiple dimming locations on one circuit, use our in-line dimmer.
Our dimmers also won’t flicker or buzz when you use them with a suitable bulb, and you can set the minimum bulb brightness.
Antique brass is what’s called a ‘living’ finish because it reacts to the air and moisture around it, causing it to darken (especially in the areas you touch most). We’ve given it a head start by ageing it by hand, so it has that antique look right out the box.
- Switch and collar made from solid brass
- Expertly reengineered electronics, using the highest-quality components, to create the most reliable dimmer
- High-capacity dimmer suitable for larger lighting loads
- Suitable for trailing or leading edge modes
- Must be used with our antique brass-finished (or paintable) plates
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
We dispatch all orders quickly so you can expect delivery in days, not weeks.
We stand behind our products for as long as you own them.
We craft our products in-house so we can strive for excellence without compromise.
We use sustainable materials and build products that last.
FAQs
Electrical items must be installed by a qualified electrician.
You can view and print instructions on our mobile-friendly instructions page.
Our clear switches and sockets come with backing paper that you can either paint, or use as a wallpaper template. When you're happy with your chosen look, secure the clear front plate over the backing paper to conceal the wires.
All our electrical products should be installed by a qualified electrician.
Yes – we sell individual components which you can find under the switches and sockets tab at the top of the page.
For help with creating your own combinations, please email our customer service team at hi@corston.com.
A retractive switch flicks back into the top 'off' position when you let go. A center retractive switch flicks back to the center 'off' position when you let go. It can be pressed up or down to make two separate connections.
When used with one of our in-line dimmer modules, a short press will turn the light on and off. A press and hold will dim and brighten the light.
Both versions must be used with one in-line dimmer module per circuit.
Intermediate switches need to be used when three or more switches are required to control the same light. Two-way switches are used at the start and end of the circuit, and one or more intermediate switches are added to the middle of the circuit.
Multiple two-way dimmer modules can't be used to control the same light. A two-way dimmer can be combined with two-way or intermediate switches to control the light from multiple locations.
Retractive and centre retractive toggles/rockers can be used for a multiple point dimming circuit when used with an in-line dimmer module (one per circuit).
All our dimmers have been engineered with anti-flicker technology. If you're experiencing flickering, please follow our mode setting instructions.
We ship the components and front plates separately to protect the plates before installation. This approach allows electricians to install the switches and sockets without having to disassemble each one too.
All our switches and sockets must be fitted with back boxes that are at least 35mm in depth. Our rocker switches and our 6G and 8G light switches must be fitted with our bespoke 47mm back boxes to ensure the flush fit of our plates.